User Tools

Site Tools


network_space_v2

LaCie Network Space v2

This page is relevant for Network Space (Max) v2 and Internet Space v2 boards.

Since mid-2011 lacie change the hardware configuration of the network space v2 to a lower one, see LaCie Network Space Lite v2.

Hardware

  • CPU ARM926EJ-S (ARMv5TE) 800MHz
  • SoC Kirkwood 88F6281_A0
  • SDRAM memory 256MB, DDR2 267MHz
  • SPI flash, NOR 512kB (MACRONIX MX25L4005CMI-12G)
  • Ethernet Gigabit port (PHY MARVELL 88E1116R)
  • 1 USB2 port, 1 connector host and 1 connector device (except for Internet Space v2)
  • 1 SATA port (2 ports for Network Space Max v2)
  • I2C EEPROM, 512 bytes (24C04 type)
  • 2 LEDs (blue and red with CPLD SATA activity blink)
  • Power push button

Network Space v2 Network Space v2

Openocd

An unreliable configuration is available here

U-Boot

The boards are almost fully supported mainline. For more informations, see our U-Boot for Kirkwood page.

Linux

The boards are almost fully supported mainline. For more informations, see our Linux for Kirkwood page.

Userspace

It is also possible to install Debian, look here.

LaCie system

For more informations about the LaCie stock system, look here.

network_space_v2.txt · Last modified: 2012/09/08 14:16 by 82.234.233.9