This page is relevant for the LaCie NAS 2Big Network v2. It is the direct successor of the 2big Network (orion-based).

• CPU ARM926EJ-S (ARMv5TE) 1200MHz
• SoC Kirkwood 88F6281_A0
• SDRAM memory 256MB, DDR2 400MHz
• SPI flash, NOR 512MB (MACRONIX MX25L4005CMI-12G)
• Ethernet Gigabit port (PHY MARVELL 88E1116R)
• 1 USB2 port, 1 connector host and 1 connector device
• 2 SATA port and 1 SATA port multiplier x2 (JMicron JMB350 revA or revB)
• 2 SATA and 1 eSATA connectors
• I2C EEPROM, 512 bytes (24C04 type)
• 1 bi-color (blue and red) front LED
• 2 bi-color (blue and red) disk LEDs with CPLD SATA activity blink
• Front push button
• Rear power switch
• Serial: undocumented TTL serial interface (3.3V)

An unreliable configuration is available here

U-Boot mainline support is ongoing. For more informations, see our U-Boot for Kirkwood page.

The boards are almost fully supported mainline. For more informations, see our Linux for Kirkwood page.

For more informations about the LaCie stock system, look here.