Differences

This shows you the differences between two versions of the page.

--- internet_space_v1 [2013/05/22 10:49] – starox
+++ internet_space_v1 [2013/05/22 11:36] (current) – starox
@@ Line 4: / Line 4: @@
 ====== Hardware ======
+===== Specifications =====
   * CPU ARM926EJ-Sid(wb) rev 0 (v5l) 400MHz (266 bogoMIPS)
@@ Line 15: / Line 17: @@
   * Power push button
   * Power (12V)
+===== Pictures =====
 {{:internet_space_v1_front.jpg|internet space v1 front}}
 {{:internet_space_v1_back.jpg|internet space v1 back}}
+===== Eeprom content =====
+^Offset ^Meaning               ^Notes ^
+|00..06 |Mac address | ethernet mac address of the device |
+|07     |Power flag  | |
+<code>
+Marvell>> imd  0x50 0 8
+: 00 d0 4b 85 f6 98 00 ff    ..K.....
+Marvell>>
+</code>
 ====== Software ======
@@ Line 24: / Line 39: @@
 U-Boot don't support the device although the internet space v1 is very similar than edminiv2.
+==== Lacie U-Boot environment ====
+<code bash>
+Marvell>> printenv
+bootargs=console=ttyS0,115200 root=/dev/sda7 ro
+bootcmd=if lump 2; then ; else run disk_disk; fi
+baudrate=115200
+loads_echo=0
+kernel_addr=0x400000
+boot_disk=disk ${kernel_addr} 1:6
+snap_disk=if snapboot 1:9 ${kernel_addr}; then; else run boot_disk; fi
+disk_disk=ide reset; run snap_disk; bootm ${kernel_addr};
+ethaddr=00:d0:4b:85:f6:98
+stdin=serial
+stdout=serial
+stderr=serial
+cpuName=926
+CASset=min
+enaMonExt=no
+enaFlashBuf=yes
+enaCpuStream=no
+MALLOC_len=4
+ethprime=egiga0
+bootdelay=3
+disaMvPnp=no
+overEthAddr=no
+usb0Mode=host
+usb1Mode=device
+ethact=egiga0
+Environment size: 558/40956 bytes
+Marvell>>
+</code>
 ===== Linux =====

LaCie NAS wiki

User Tools

Site Tools

Differences

Page Tools