====== LaCie Network Space v2 ======

This page is relevant for Network Space (Max) v2 and Internet Space v2 boards.

Since mid-2011 lacie change the hardware configuration of the network space v2 to a lower one, see [[network_space_lite_v2|LaCie Network Space Lite v2]].

===== Hardware =====

  * CPU ARM926EJ-S (ARMv5TE) 800MHz
  * SoC Kirkwood 88F6281_A0
  * SDRAM memory 256MB, DDR2 267MHz 
  * SPI flash, NOR 512kB (MACRONIX MX25L4005CMI-12G)
  * Ethernet Gigabit port (PHY MARVELL 88E1116R)
  * 1 USB2 port, 1 connector host and 1 connector device (except for Internet Space v2)
  * 1 SATA port (2 ports for Network Space Max v2)
  * I2C EEPROM, 512 bytes (24C04 type)
  * 2 LEDs (blue and red with CPLD SATA activity blink)
  * Power push button

{{:netspace_v2_00.jpg?640x480|Network Space v2}}
{{:netspace_v2_01.jpg?640x480|Network Space v2}}

===== Openocd =====

An unreliable configuration is available [[ftp://lacie-nas.org/openocd/netspace_v2.cfg|here]]

===== U-Boot =====

The boards are almost fully supported mainline. For more informations, see our [[ubootforkirkwoodsocs|U-Boot for Kirkwood]] page.

===== Linux =====

The boards are almost fully supported mainline. For more informations, see our [[linuxforkirkwoodsocs|Linux for Kirkwood]] page.

===== Userspace =====

It is also possible to install Debian, look [[debian_install|here]].

===== LaCie system =====

For more informations about the LaCie stock system, look [[lacie_stock|here]].