LaCie NAS wiki

User Tools

Site Tools

Trace:
installdebian2big

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
installdebian2big [2012/02/21 15:00] – 93.104.155.24installdebian2big [2012/02/21 15:03] (current) – 93.104.155.24
Line 209: Line 209:
 ===== Partition Disks ===== ===== Partition Disks =====
 Using a custom debian installation on the 2BigNetwork allows great flexibility with the partition structure.  The only caveat is that the kernel _must_ be on partition 6 of one or both of the drives, usually both to make the drives swappable.  The startup of the initial ram fs will search for a root filesystem on all RAID and regular disk partitions, and if one is found, will switch to it and complete the boot sequence from there. Using a custom debian installation on the 2BigNetwork allows great flexibility with the partition structure.  The only caveat is that the kernel _must_ be on partition 6 of one or both of the drives, usually both to make the drives swappable.  The startup of the initial ram fs will search for a root filesystem on all RAID and regular disk partitions, and if one is found, will switch to it and complete the boot sequence from there.
 +
 +If you didn't change the //bootargs// variable in U-Boot, the rootfs must be on partition 7.
  
 Use the supplied **fdisk** to partition the disk.  An example scheme is below Use the supplied **fdisk** to partition the disk.  An example scheme is below
 +
 ==== Running on a single 500GB disk with no RAID === ==== Running on a single 500GB disk with no RAID ===
  
installdebian2big.1329832818.txt.gz · Last modified: by 93.104.155.24

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
GNU Free Documentation License 1.3 Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki