LaCie NAS wiki

User Tools

Site Tools

Trace:
installdebian2big

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
installdebian2big [2011/10/27 22:56] – correct with good variable automatically set by clunc 93.12.46.136installdebian2big [2012/02/21 15:03] (current) – 93.104.155.24
Line 88: Line 88:
   $ ./clunc -i ${NAS_IP}   $ ./clunc -i ${NAS_IP}
  
-  * mainlineLinux support: +  * Edit U-Boot env variables (don't do this if you use the fix_id kernel):
- +
-  Marvell>> setenv mainlineLinux yes +
-  setenv mainlineLinux yes +
-  Marvell>> saveenv +
-  saveenv +
-  Saving Environment to Flash... +
-  . +
-  Un-Protected 1 sectors +
-  Erasing Flash... +
-  . done +
-  Erased 1 sectors +
-  Writing to Flash... done +
-  . +
-  Protected 1 sectors +
-  Marvell>> reset +
-  reset +
- +
-  * Fix machine ID: +
-Only do this if you are using the fixed ID kernel+
  
   Marvell>> setenv arcNumber 2342   Marvell>> setenv arcNumber 2342
Line 228: Line 209:
 ===== Partition Disks ===== ===== Partition Disks =====
 Using a custom debian installation on the 2BigNetwork allows great flexibility with the partition structure.  The only caveat is that the kernel _must_ be on partition 6 of one or both of the drives, usually both to make the drives swappable.  The startup of the initial ram fs will search for a root filesystem on all RAID and regular disk partitions, and if one is found, will switch to it and complete the boot sequence from there. Using a custom debian installation on the 2BigNetwork allows great flexibility with the partition structure.  The only caveat is that the kernel _must_ be on partition 6 of one or both of the drives, usually both to make the drives swappable.  The startup of the initial ram fs will search for a root filesystem on all RAID and regular disk partitions, and if one is found, will switch to it and complete the boot sequence from there.
 +
 +If you didn't change the //bootargs// variable in U-Boot, the rootfs must be on partition 7.
  
 Use the supplied **fdisk** to partition the disk.  An example scheme is below Use the supplied **fdisk** to partition the disk.  An example scheme is below
 +
 ==== Running on a single 500GB disk with no RAID === ==== Running on a single 500GB disk with no RAID ===
  
installdebian2big.1319749013.txt.gz · Last modified: by 93.12.46.136

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
GNU Free Documentation License 1.3 Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki